James Baroud Side Awning 1.2, 250 x 270 cm

The cleverly designed awnings with optional side walls provide additional changing rooms and lounges upon request and protect against sun or rain. The awning is available in three sizes. With an extension of 270 cm and a width of 200 or 250 cm for mounting on the side of the vehicle, and with an extension of 240 cm and a width of 130 cm for mounting on the rear of the vehicle. The telescopic poles, which support the awning, can be extended up to a length of 220 cm. Both awnings for the side of the vehicle are designed so that a tent entrance can be installed at any time. The corresponding opening can be used as a pass-through without an entrance tunnel or can be sealed wind and waterproof. Two continuous C-rails are embedded in the vehicle-side profile. This allows for very easy mounting, for example, with hex screws and 90° angles. To store the awning, the crossbars are first folded into the aluminum profile on the vehicle and the height-adjustable feet are folded into the outer profile. Then the awning is rolled up against the profile on the vehicle. For protection, a cover made of sturdy PVC tarpaulin fabric is folded over the awning and closed with Velcro. A construction as simple as it is ingenious, like many things from James Baroud. For all three awning sizes, a set with three side walls with large windows and a door is optionally available. James Baroud has also come up with a clever solution for this. A semicircular profile with an adjoining keder rail is attached to the crossbar and roof lining, and the side wall is pulled into the keder rail. This creates a wind and waterproof connection. The front wall is pulled into the keder rail of the front aluminum profile and connected to the side walls by zipper. The rounded windows are a real eye-catcher and clearly stand out from the usual functional buildings. Due to their exceptional size, the interior is pleasantly bright and friendly. The windows, equipped with mosquito nets, can be closed opaquely if required. Side Awning 1.0 vs. Side Awning 1.2 Except for the pass-through where the tunnel is mounted to the roof tent, the awnings are identical. The tunnel hole of the Side Awning 1.2 now has a length of 70cm, compared to the Side Awning 1.0 with a length of 58cm. In width, there are only minimal differences of 3-4 cm. The new awning thus fits optimally in combination with the Odyssey Tunnel. Product features: Awnings provide protection from sun and rain, with optional side walls for changing rooms and lounges. Available in 3 sizes: 270 cm extension, 200/250 cm width (vehicle side) 240 cm extension, 130 cm width (vehicle rear) Telescopic poles extendable up to 220 cm. Tent entrance can be installed on the vehicle side at any time. Side Awning 2.0: For Odyssey roof tent, larger pass-through, only in combination with Odyssey Tunnel. Easy mounting via C-rails with hex screws. Awning is stored compactly, protected with PVC tarpaulin cover.

Technical Data

• Weight: 12 Kg
• Version: Side Awning