James Baroud Falcon 270° Awning, RHS

With the Falcon, James Baroud is launching a 270-degree awning for the 2019 season. The fabric used is identical to the fabric James Baroud uses for its tents. The awning frame is made of aluminum, and the bracket is made of iron. The awning has a tare weight of 32.6 kg and a total weight including brackets of 48 kg. When closed, the awning has a length of 250 cm, a width of 17 cm, and a height of 20 cm. It can be mounted on the Rhino-Rack, AEV Roof Racks, as well as on roof racks. The two included fixing brackets are attached with screws in the C-rails on the back of the awning. The other side of the bracket is then attached to the roof rack. The supporting telescopic poles can be extended up to 220 cm. As an accessory, there is a set of three side walls and a mosquito net set available for the awning. When closed, the awning is packed in a three-part truck tarp, which is sealed with Velcro along its length. At the ends, it is also secured vertically with tensionable straps. The main profile is made of aluminum with an iron bracket for the four swivel arms. Three arms swivel backward, one forward. An opening for the tent tunnel is also integrated into the awning. Optionally, side walls can be attached, which can be pulled into a keder rail. Setup: To open the awning, the fixed tensioning straps on the sides of the cover must first be opened. Then, the cover tarp must be laid back over the swivel arms. After opening the inner tensioning straps, the awning fabric is unrolled, and the awning can be fanned out. The awning is available for the left (LHS) or right (RHS) side of the vehicle. It is tensioned with a strap that is attached to the rear roof rack. In an additional bag, there are four telescopic poles (two small, two large) that are inserted horizontally between the swivel arms to tension the outside of the awning. Then, the four feet are folded out and set up from the aluminum profiles (swivel arms). Thanks to the telescopic mechanism, these can be set up even on uneven terrain by simply tightening them. Falcon 1.0 vs. Falcon 1.2 Except for the pass-through where the tunnel is mounted into the roof tent, the awnings are identical. The tunnel opening of the Falcon 1.2 now has a length of 70cm, compared to the Falcon 1.0 with a length of 58cm. In terms of width, there are only minimal differences of 3-4 cm. The new awning is therefore perfectly suited in combination with the Odyssey Tunnel. One person can set up the awning alone. Product features: Falcon awning from James Baroud, 270-degree awning, available from the 2019 season. Fabric corresponds to that of the James Baroud tent, aluminum frame, iron bracket. Tare weight: 32.6 kg, total weight with brackets: 48 kg. Dimensions when closed: 250 cm length, 17 cm width, 20 cm height. Mountable on Rhino-Rack, AEV Roof Racks, and roof racks. Attachment is done with two included fixing brackets that are screwed into C-rails on the back of the awning. Supporting telescopic poles can be extended up to 220 cm. Accessories: Set of three side walls and mosquito net. Awning is packed in a three-part truck tarp when closed, secured with Velcro, and additionally fixed at the ends with tensionable straps. Main profile made of aluminum with iron bracket for four swivel arms (three swivel backward, one forward). Integrated opening for the tent tunnel, side walls can optionally be attached, which can be pulled into a keder rail.

Technical data

• Weight: 48 kg
• Width: 17 cm
• Height: 20 cm
• Length: 250 cm