James Baroud Falcon 270° Awning 1.2, LHS

The Falcon 1.2 awning is designed so that a tent entry can be installed at any time. Without an entry tunnel, the corresponding opening can either be used as a passage or closed in a windproof and waterproof manner. The James Baroud 1.2 side awning has a significantly larger and more comfortable passage than the 1.0 side awning. With the Falcon 1.2, James Baroud is launching the successor to the classic awning. The fabric used is identical to the fabric James Baroud uses for its tents. The awning frame is made of aluminum, and the bracket is made of iron. The awning has an empty weight of 32.6 kg and a total weight including brackets of 48 kg. When closed, the awning has a length of 250 cm, a width of 17 cm, and a height of 20 cm. It can be mounted on the Rhino-Rack, AEV Roof Racks, and other roof racks. The two supplied fixing brackets are attached with screws in the C-rails on the back of the awning. The other side of the bracket is then attached to the roof rack. The supporting telescopic poles can be extended up to 220 cm. As an accessory, there is a set of three side walls and a mosquito net available for the awning. When closed, the awning is packed in a three-part truck tarpaulin, which is closed with Velcro along its length. At the ends, it is also secured vertically with tensionable straps. The main profile consists of aluminum with an iron bracket for the four swivel arms. Three arms swivel backward, one forward. In addition, an opening for the tent tunnel is integrated into the awning. Optionally, side walls can be attached, which can be pulled into a keder rail. Assembly: To open the awning, the firmly mounted tensioning straps on the sides of the cover must first be opened. Then the cover tarpaulin must be laid backward over the swivel arms. After opening the inner tensioning straps, the awning fabric is unrolled, and the awning can be fanned out. The awning is available for the left (LHS) or right (RHS) side of the vehicle. It is tensioned by a strap that is attached to the rear roof rack. In an additional bag, there are four telescopic poles (two small, two large) that are inserted horizontally between the swivel arms to tension the outside of the awning. Then the four feet are folded out of the aluminum profiles (swivel arms) and set up. Due to the telescopic mechanism, these can be set up even on uneven ground by simply tightening them. Falcon 1.0 vs. Falcon 1.2 Except for the passage where the tunnel is mounted to the roof tent, the awnings are identical. The tunnel hole of the Falcon 1.2 now has a length of 70 cm, compared to the Falcon 1.0 with a length of 58 cm. In width, there are only minimal differences of 3-4 cm. The new awning is therefore ideally suited in combination with the Odyssey Tunnel. It is possible for one person to set up the awning alone. Product features: Falcon 1.2 Awning: Allows a tent entry to be installed at any time, which can either be used as a passage or closed windproof and waterproof. Side Awning 1.2: Larger and more comfortable passage compared to the 1.0 version. Successor to the classic Falcon awning with the same fabric as James Baroud tents, aluminum frame, and iron bracket. Empty weight: 32.6 kg, total weight with brackets: 48 kg. Dimensions when closed: 250 cm length, 17 cm width, 20 cm height. Can be mounted on Rhino-Rack, AEV Roof Racks, and other roof racks, with fixing brackets in C-rails. Telescopic poles extendable up to 220 cm for support. Accessories: Set of three side walls and a mosquito net. When closed, the awning is packed in a three-part truck tarpaulin, secured with Velcro and tensionable straps. Aluminum profile with iron bracket for four swivel arms (three backward, one forward), integrated opening for tent tunnel. Side walls can optionally be pulled into a keder rail. Assembly: Open tensioning straps, lay cover tarpaulin backward, unroll awning fabric, and fan out. Available for the left (LHS) or right (RHS) side of the vehicle. The awning is tensioned by a strap that is attached to the rear roof rack. Four telescopic poles are inserted horizontally for stabilization. Falcon 1.0 vs. Falcon 1.2: The tunnel of the Falcon 1.2 has a length of 70 cm (compared to 58 cm of the Falcon 1.0) and is ideal for the Odyssey Tunnel.

Technical data

• Version: Falcon