ARB Tire Repair Kit Speedy Seal 2

What components does an ARB Speedy Seal 2 repair kit contain?

An ARB Speedy Seal 2 repair kit typically contains the following components:

• - An Allen key for loosening and tightening screws on the tools
• - Tire pressure gauge to check the current bar number in the tire
• - high-quality reamer for roughening the tire rubber and insertion mandrel for inserting the repair cords
• - 30 repair cords
• - small pliers for pulling out loose tire parts inside the tire
• - various valve caps, also valve cans and replacement valves with toolkit
• -Grease for better penetration into the tire
• - Vulcanizing strips
• - Knife for removing residues of the vulcanizing strip

How do you install an ARB Speedy Seal 2 repair kit?

To install an ARB Speedy Seal 2 repair kit, you must follow these steps:

1. If possible, remove the damaged tire from the vehicle and thoroughly clean the tread to inspect the puncture site.
2. Remove any foreign objects from the hole in the tire.
3. Use the included handle and chisel to slightly widen and smooth the hole.
4. Insert the insertion mandrel into the hole and push the plug into the tool.
5. Press the tool firmly against the hole and then quickly pull it out. The repair cord should stay in the hole.
6. Use a sharp blade to cut off the excess plug.
7. Check the tire pressure and adjust it if necessary.
8. Reinstall the repaired tire on the vehicle.

Note: It is important to follow the manufacturer's instructions and use the correct tools and protective clothing to avoid injury. All information is provided without guarantee.